Journal Articles

(indexed in Thomson Reuter's Journal Citation Reports with Impact Factor)

 

You can also find the publications here

 

YEAR 2013

 

[ACL 168] F. SALAUN, G. CREACH, F. RAULT, X. ALMERAS 

Thermo-physical properties of polypropylene fibers containing a microencapsulated flame retardant,

Polymers for Advanced Technologies, Vol.24, n°2, pp.236-248, 2013, IF = 1.635

 

[ACL 169] H. SOUGUIR, F. SALAUN, P. DOUILLET, I. VROMAN, S. CHATTERJEE. 

Nanoencapsulation of curcumin in polyurethane and polyurea shells by an emulsion diffusion method

Chemical Engineering Journal, Vol.221, pp.133-145, 2013, IF = 3.4

 

[ACL 170] N. Behary, A. KERKENI, A. Perwuelz, N.E. Chihib, P. DHULSTER

Bioactivation of PET woven fabrics using alginate biopolymer and the bacteriocin nisin

Textile Research Journal - Published online before print January 11, 2013, IF = 1.135

 

[ACL 171] M.ASHRAF, C.CAMPAGNE, A. PERWUELZ, P. CHAMPAGNE, A. LERICHE, C. COURTOIS

Development of superhydrophilic and superhydrophobic polyester fabric by growing Zinc Oxide nanorods

Journal of Colloid and Interface Science, Vol.394, pp.545?553, 2013, IF = 3.172

 

[ACL 172] V. PASQUET, N. BEHARY, A. PERWUELZ, J.ISAAD

Dyeing of synthetic Fabrics in water using azoic dyes based on boronic acid derivatives

Fibers and Polymers, Vol.14, n°7, pp.1141-1147, 2013, IF = 0.912

 

[ACL 173] V. Pasquet, A. Perwuelz, N. Behary, J. Isaad

Vanillin, a potential carrier for low temperature dyeing of polyester fabrics

Journal of Cleaner Production, Vol.43, pp.20?26, 2013, IF = 3.398

 

[ACL 174] S. GASSITA, L. MARMORET, A. PERWUELZ, H. BEJI 

Infiltration Kinetics of Wetting in a Building Plaster and the Effect of Added Glass and Hemp Fibers

ISRN Civil Engineering, Vol.2013, Article ID 282743, 8 pages, 2013, IF = 0.5

 

[ACL 175] S. KURUN BAHADIR, S. THOMASSEY, F. KALAOLU, V. KONCAR 

An Algorithm Based on Neuro-Fuzzy Controller Implemented in A Smart Clothing System For Obstacle Avoidance,

The International Journal of Computational Intelligence Systems, Vol. 6, Issue 3, pp. 503-517, 2013, ,  IF = 1.471

 

[ACL 176] F. M. KELLY, L. MEUNIER, C. COCHRANE, V. KONCAR

Polyaniline: Application as Solid State Electrochromic in a Flexible Textile Display,

Displays, VOL. 34, n°1, pp.1-7, 2013, pp.1-7, IF = 1.101

 

[ACL 177] M.ASHRAF, C.CAMPAGNE, A. PERWUELZ, P. CHAMPAGNE, A. LERICHE, C. COURTOIS

Development of antibacterial polyester fabric by growth of ZnO nano rods

Journal of Engineered Fibers and Fabrics, Vol.9, n°1 on March 2014, IF = 0.89

 

[ACL 178] M. Amiot, M. Lewandowsky, P. Leite, M. Thomas, A. Perwuelz

An evaluation of fiber orientation and organization in nonwoven fabrics by tensile, air permeability and compression measurements

Journal of Materials Science, accepté en mars 2013, IF = 2.163

 

[ACL 179] J. ISAAD, A. EL ACHARI, F. MALEK

Bio-polymer starch thin film sensors for low concentration detection of cyanide anions in water

Dyes and Pigments, Vol.97, pp.134-140, 2013, IF = 3.532

 

[ACL 180] J. ISAAD, A. EL ACHARI, F. MALEK

Bio-polymer starch thin film sensors for low concentration detection of cyanide anions in water

Dyes and Pigments, Vol.97, pp.134-140, 2013, IF = 3.532

 

[ACL 181] J. ISAAD, A. EL ACHARI

Azathia-crown ether possessing a dansylfluorophore moiety functionalized Silica nanoparticles as hybrid material for mercury detection in aqueous medium

Tetrahedron, accepté pour publication, DOI.org/10.1016/j.tet.2013.04.072, 2013, IF = 2.803

 

[ACL 182] J. ISAAD

Highly water Soluble dyes based on pyrazolone derivatives of carbohydrates

Tetrahedron, Vol;69, pp.2239-2250, IF = 2.803

 

[ACL 183] C. COCHRANE, S. MORDON, J.C. LESAGE, V. KONCAR

New design of textile light diffusers for photodynamic therapy

Materials Science and Engineering C - 2013, accepté le 02/12/2013, MSEC-D-12-00287R1, IF =  2.686

 

[ACL 184] F.M. KELLY, C. COCHRANE, V. KONCAR

Evaluation of Solid or Liquid Phase Conducting Polymers within a Flexible Textile Electrochromic Device

IEEE/OSA Journal of Display Technology, accepted on February 08, 2013, Manuscript ID JDT-00959-2012, IF = 2.28

 

[ACL 185] A. R. LABANIEH, X. LEGRAND, V. KONCAR, D. SOULAT

Novel optimization method to estimate the geometrical properties of a multiaxial 3D woven performs

Journal of Reinforced Plastics and Composites, Vol.32, n°10, pp.700-712, 2013 , IF = 0.727

 

[ACL 186] W. NAJJAR, X. LEGRAND, P. DALSANTO, D. SOULAT, S. BOUDE 

Analysis of the blank holder force effect on the preforming process using a simple discrete approach

Key Engineering Materials, Vols.554-557, pp.441-446, 2013, IF = 0.224

 

[ACL 187] L.WANG, X.ZENG, L.KOEHL and Y.CHEN

From body measurements to human perception of body shapes: modeling using intelligent techniques

International Journal of Advanced Operations Management, Vol.5, n°1, pp. 74-90, 2013,  IF = 1.252

 

[ACL 188] R. ABD JELIL, X. ZENG, L. KOEHL, A. PERWUELZ

Modeling plasma surface modification of textile fabrics using artificial neural networks

Engineering Applications of Artificial Intelligence, accepted in March 2013, IF = 1.4.

 

[ACL 189] H. ALIBI, F. FAYALA, N. BHOURI, A. JEMNI, X. ZENG

An optimal artificial neural network system for designing knit stretch fabrics

Journal of The Textile Institute, Vol.3, n°1, pp.2151-4798, January 2013, IF = 0.51.

 

[ACL 190] Z. XUE, X. ZENG, L. KOEHL, Y. CHEN

Extracting fabric hand information from visual representations of flared skirts

Textile Research Journal, accepted in March 2013, IF = 1.135.

 

[ACL 191] G. BROASCA, M. CIOCOIU, D. FARIMA, N. VRINCEANU, C. CAMPAGNE, M. IORGOAEA

Novel approach regarding zeta potential variation as a consequence of antimicrobial fabrics washing

Tekstil ve Konfeksiyon, Vol.23, n°1, pp.43-48, 2013, IF = 0.39

 

[ACL 192] C. RIMBU, N. VRINCEANU, G. BROASCA, C. CAMPAGNE, M. PETRUTA SUCHEA, A. NISTOR

Zinc oxide application in textile industry: surface tailoring and water barrier attributes as parameters with direct implication in comfort performance

 Textile Research Journal, publication en ligne le 08 mars 2013, doi:10.1177/0040517513478460, IF = 1.135. 

 

[ACL 193] M. IORGOAEA, S. GIRAUD, C. CAMPAGNE, D. FARIMA, L. CIOBANU, M. CIOCOIU, G. BROASCA

Comfort properties of knitted fabrics with massaging effects

Industria Textila, Vol.64, n)1, pp.34-39, 2013 IF=0.291 


[ACL 194] P. OUAGNE, D. SOULAT, J. MOOTHOO, E. CAPELLE, S. GUERET 

Complex shape forming of a flax woven fabric; analysis of the tow buckling and misalignement defect

Composites: Part A , dx.doi.org/10.1016/j.compositesa.2013.03.017, Accepted Date: 21 March 2013., IF=2.744


[ACL 195] J. VILFAYEAU, D. CREPIN, F. BOUSSU, D. SOULAT, P. BOISSE
Numerical modelling of the weaving process for textile composite

Key Engineering Materials Vols. 554-557, pp.472-477, 2013,  IF = 0.224

[ACL 196] J. BOUCHARD, A. CAYLA, V. LUTZ, E. DEVAUX, C. CAMPAGNE 

?Electrical and mechanical properties of phenoxy/multiwalled carbon nanotubes multifilament yarn processed by melt spinning?

Textile Research Journal, Vol.80, n°20, pp. 2106-2115, 2013, IF = 1.135

 

[ACL 197] C. HA-MINH, A. IMAD, T. KANIT, F. BOUSSU 

Numerical analysis of a ballistic impact on textile fabric

International Journal of Mechanical Sciences, Available online 29 January 2013, ISSN 0020-7403, 10.1016/j.ijmecsci.2013.01.014, IF=1.613

 

[ACL 198] S. THOMASSEY, P. BRUNIAUX 

A template of ease allowance for garments based on a 3D reverse methodology

International Journal of Industrial Ergonomics, sous presse, accepté en avril 2013, IF = 1.208.

 

[ACL 199] P. WANG, N. HAMILA, P. BOISSE 

Thermoforming simualtion of multilayer composites with continuous fibres and thermoplastic matrix

Composites Part B: Engineering, Vol.52, pp.127-136, 2013, IF = 2.143.

[ACL 200] M. LEFEBVRE, F. BOUSSU, D. COUTELLIER

?Influence of high-performance yarns degradation inside three-dimensional warp interlock fabric?

Journal of Industrial Textiles, Vol.42, n°4, pp.475-488, 2013, IF = 1.308

 

[ACL 201] V. Pasquet, N. Behary, A. Perwuelz

Environmental Impacts of  Chemical/Ecotechnological /Biotechnological hydrophilisation of Polyester fabrics

Journal of Cleaner Production, accepté le 24 juin 2013, IF = 3.398

 

[ACL 202] X. TAO, P. BRUNIAUX

 Toward advanced three-dimensional modeling of garment prototype from draping technique,

 International Journal of Clothing Science and Technology, Vol.25, n°4, 2013, IF = 0.458

 

[ACL 203] C. HA-MINH, A. IMAD, F. BOUSSU, T. KANIT, D. CREPIN. 

On analytical modelling to predict of the ballistic impact behaviour of textile multi-layer woven fabric, Composite Structures, Vol.99, pp.462-476, 2013, IF = 2.231

 

[ACL 204] S. Petrusic, P. Jovancic, M. Lewandowski, S. Giraud, S. Grujic, S. Ostojic, B. Bugarski, V. Koncar

Properties and drug release profile of poly(Nisopropylacrylamide) microgels functionalized with maleic anhydride and alginate

Journal of Materials Science, Vol.48, n°22, pp.7935-7948, 2013,   IF = 2.163

 

[ACL 205] S. CAMANO, N. BEHARY, P. VROMAN, C. CAMPAGNE

Comparison of bio and eco-technologies with chemical methods for pre-treatment of flax fibers: impact on fiber Properties

Journal of Engineered Fibers and Fabrics, acceptée le 16 juillet 2013, IF = 0.89

 

[ACL 206] N. TRIFIGNY, F. M. KELLY, C. COCHRANE, F. BOUSSU, V. KONCAR, D. SOULAT

PEDOT:PSS-based piezo-resistive sensors applied to reinforcement glass fibres for in-situ measurement during the composite material weaving process

Sensors 2013, Vol.13, n°8, pp.10749-10764, 2013,  IF = 1.953

 

YEAR 2012

 

[ACL 123] I. CRISTIAN, S. NAUMAN, F. BOUSSU, V. KONCAR

A study of strength transfer from tow to textile composite using different reinforcement architectures Applied Composite Materials, Vol.19, n°3-4, pp.427-442, 2012, IF = 1.048

 

[ACL 124] N. DIDANE, S. GIRAUD, É. DEVAUX, G. LEMORT

A comparative study of POSS as synergists with zinc phosphinates for PET fire retardancy ,

Polymer Degradation and Stability, vol.97, n°3, pp.383-391, 2012, IF = 2.77

 

[ACL 125] A. CAYLA, C. CAMPAGNE, M. ROCHERY, É. DEVAUX

Melt spun multifilament yarns of carbon nanotubes-based polymeric blends: Electrical, mechanical and thermal properties, 

Synthetic Metals, vol.162, pp.759-767,2012, IF = 2.109

 

[ACL 126] M. Lewandowski, M. Amiot, A. Perwuelz

Development and Characterization of 3D Nonwoven Composites, 

Materials Science Forum, vol.714, pp. 714, 131-137, 2012, IF = 0.399

 

[ACL 127] N. DIDANE, S. GIRAUD, É. DEVAUX, G. LEMORT

Development of fire resistant PET fibrous structures based on phosphinate-POSS blends,

Polymer Degradation and Stability, vol.97, n°6, pp.879-885, 2012, IF = 2.77

 

[ACL 128] N. DIDANE, S. GIRAUD, É. DEVAUX

Fire performances comparison of back coating and melt spinning approaches for PET covering textiles,

Polymer Degradation and Stability, vol.97, n°7, pp.1083-1089, 2012, IF = 2.77

 

[ACL 129] P. OUAGNE, D. SOULAT, C. TEPHANY, D.DURIATTI, S. ALLAOUI, G. HIVET 

Mechanical characterisation of flax based woven fabrics and in situ measurements of tow tensile strain during the shape forming,

Journal of Composite Materials, accepted in press, ID JCM-12-0263.R2, IF=1.068

 

[ACL 130] P. BRUNIAUX, D. CREPIN, B. LUN

Modeling the mechanics of a medical compression stocking through its components behavior : Part I ? modeling at the yarn scale,

Textile Research Journal, Vol.82, n°18, pp.1833-1845, 2012, IF= 1.135

 

[ACL 131] L. Marmoret, M. Lewandowski, A. Perwuelz

An Air Permeability Study of Anisotropic Glass Wool Fibrous Products , 

Transport in Porous Media, vol.93, n°1, 79-97, 2012, IF = 1.551

 

[ACL 132] J. PAYEN, P. VROMAN, M. LEWANDOWSKI, A. PERWUELZ, S. CALLE-CHAZELET, D. THOMAS

Influence of fiber diameter, fiber combinations and solid volume fraction on aerosol air filtration properties in nonwovens, 

Textile Research Journal, Vol.82, n°19, pp.1948-1959, 2012, IF = 1.135

 

[ACL 133] S. Petrusic, P. Jovancic, M. Lewandowski, S. Giraud, B. Bugarski, J. Djonlagic, V. Koncar

Synthesis, characterization and drug release properties of thermosensitive poly(N-isopropylacrylamide) microgels, 

Journal of Polymer Research, pp.9979-9989, published online on 15.09.2012, IF = 2.019 

 

[ACL 134] S. Petrusic, M. Lewandowski, S. Giraud, P. Jovancic, B. Bugarski, S. Ostojic, V. Koncar

Development and characterization of thermosensitive hydrogels based on poly(N-isopropylacrylamide) and calcium alginate, 

Journal of applied polymer science, Vol.124, pp.890-903, 2012, IF = 1.395

 

[ACL 135] J. BOUCHARD, A. CAYLA, V. LUTZ, E. DEVAUX, C. CAMPAGNE

Electrical and mechanical properties of phenoxy/multiwalled carbon nanotubes multifilament yarn processed by melt spinning, 

Textile Research Journal, Vol.82, n°20, pp.2116 ? 2125, 2012, IF = 1.135

 

[ACL 136] N. BEHARY, A. PERWUELZ, C. CAMPAGNE, D. LECOUTURIER, P. DHULSTER, A.S. MEMEDE 

Adsorption of Surfactin produced from Bacillus Subtilis using NonWoven PET (Polyethylene Terephtalate) fibrous membranes functionalized with Chitosan, 

Colloids and surfaces B :  Biointerfaces, Vol.90, pp.137?143, 2012, IF = 3.554

 

[ACL 137] G. AGARWAL, A. PERWUELZ, L. KOEHL, K.S. LEE

Interaction between the Surface Properties of the Textiles and the Deposition of Cationic Softener, 

Journal of Surfactants and Detergents, Vol.15, n°1, pp.97-105,  2012, IF = 1.515

 

[ACL 138] J. Ran, G. Bénistant, C. Campagne,  A. Périchaud, F. Chai, N. Blanchemain, A. Perwuelz

Characterization of nonwoven PET devices functionalized with Cationic polymer

Journal of Applied Polymer Science, Vol. 124, n°5, pp.3583?3590, 2012, IF = 1.395 

 

[ACL 139] A. Kerkeni, N. Behary, A. Perwuelz, D. Gupta

Dyeing of PET woven fabric with Curcumin: Effect of dye concentrations and surface pre-activation using Air-atmospheric plasma and UV excimer treatment,
Coloration Technology , Vol.128, n°3, 2012, IF = 0.899

 

[ACL 140] R. A. Jelil, X. Zeng, L. Koehl, A. Perwuelz

Most relevant parameters of woven fabric structure controlling atmospheric air-plasma treatments,

Textile Research Journal, Vol.82, n°18, pp.1859-1869, 2012, IF = 1.135

 

[ACL 141] M. DE SAXCE, A. PERWUELZ, S. PESNEL

LCA of bed sheets - some relevant parameters for lifetime assessment,

Journal of cleaner production, Vol. 37,  pp.221-228, 2012, IF = 3.398

 

[ACL 142] J. BARDY, X. LEGRAND, A. CROSKY

Configuration of a genetic algorithm used to optimise fibre steering in composite laminates,

Composite Structures, Vol., n°6, , pp.2048-2056, 2012, IF=2.231

 

[ACL 143] S. CHATTERJEE, F. SALAUN, C. CAMPAGNE, S. VAUPRE, A. BEIRAO

Preparation of microcapsules with multi-layers structure stabilized by chitosan and sodium dodecyl sulphate, 

Carbohydrate Polymers, Vol.90, n°2, pp.967-975, 2012, IF = 3.479

 

[ACL 144] F. SALAUN, I. VROMAN, I. ELMAJID

A novel approach to synthesize and to fix microparticles on cotton fabric,

Chemical Engineering Journal, Vol.213, n°0, pp.78-87, 2012, IF = 3.691

 

[ACL 145] N. DIDANE, S. GIRAUD, E. DEVAUX, G. LEMORT, G. CAPPON

Thermal and fire resistance of fibrous materials made by PET containing flame retardant agents,

 Polymer Degradation and Stability, Vol.97, n°12, pp.2545-2551, 2012, IF=2.77

 

[ACL 146] X. TAO, V. KONCAR, C. DUFOUR

Realization of fibrous electrochemical transistors and textile electronic circuits, 

Actualite Chimique, n°360-361, pp.65-68, février-mars 2012, IF = 0.1

 

[ACL 147] S. NAUMAN, I. CRISTIAN, V. KONCAR

Intelligent carbon fibre composite based on 3D - interlock woven reinforcement,

Textile Research Journal, Vol.82, n°9, pp.931-944, 2012, IF = 1.135

 

[ACL 148] S. KURSUN BAHADIR, V. KONCAR, F. KALAOGLU

Wearable Obstacle Detection System Fully Integrated to Textile Structures for Visually Impaired People,

Sensors & Actuators: A. Physical, Vol.179, pp.297-311, June 2012, IF= 1.841

 

[ACL 149] Y. NAWAB, X. LEGRAND, V. KONCAR

Study of changes in 3D woven multilayer interlock fabric preforms while forming,

The Journal of the Textile Institute, Vol.103, n°2, pp.1273-1279, December 2012, IF=0.725

 

[ACL 150] S. KURSUN BAHADIR, F. KALAOGLU, V. KONCAR

Assessing the signal quality of ultrasonic sensor on different conductive yarns used as transmission lines,

Fibres & Textiles in Eastern Europe, Vol. 19, No. 5 (88), pp. 75-81, IF = 0.629

 

[ACL 151] H. WANG, C. VASSEUR,  N. CHRISTOV, Vladan KONCAR

Vision Servoing of Robot Systems Using Piecewise Continuous Controllers and Observers,

Mechanical Systems and Signal Processing, Vol. 33, pp. 132 - 141, 2012, IF = 1.762

 

[ACL 152] S. KURSUN BAHADIR, F. KALAOGLU, V. KONCAR 

Analysis of Vibrotactile Perception via e-Textile Structure by Using Fuzzy Logic,

Fibres & Textiles in Eastern Europe, Iss. °6A(95), pp.91-97, 2012 IF = 0.801

 

[ACL 153] S. KUR?UN BAHADIR, V. KONCAR, F. KALAO?LU

Crosstalk Effect in a Fabric Circuit Developed For Multi-Connection of Sonar Sensors, 

Tekstil ve Konfeksiyon, Vol. 22, n° 3, pp.197-202, 2012, IF = 0.23

 

[ACL 154] C. HA-MINH, A. IMAD, F. BOUSSU, T. KANIT, D. CREPIN

Numerical study on the effects of yarn mechanical transverse properties on the ballistic impact behavior of textile fabric,

The Journal of Strain Analysis for Engineering Design, Vol.47, n°7, pp.524-534, 2012 IF = 1.085

 

[ACL 155] C. HA-MINH, , F. BOUSSU, T. KANIT, D. CREPIN, A. IMAD

Effect of Frictions on the Ballistic Performance of a 3D Warp Interlock Fabric: Numerical Analysis,

Applied Composite Materials, Vol.19, n°3-4, pp.333-347, 2012, IF = 1.048

 

[ACL 156] S. NAUMAN, I. CRISTIAN, F. BOUSSU

Geometrical Modelling Of Angle Warp Interlock Fabrics

Journal of Textile Institute, Vol.103, n°7, pp. 766-77, July 2012, IF=0.725

 

[ACL 157] A-M. PENSE-LHERITIER, L. KOEHL, M. LAVARDE, S. GAGNAIRE, K. VIE 

Contribution of the Sensorial Evaluation of Velvet Fabric in Cosmetic Emulsions to the Sensorial Universe, Journal of Sensory Studies, Vol.27, n°5, pp.365?374, 2012, IF = 2.281

 

[ACL 158] J. ISAAD, F. MALEK, A. EL ACHARI

A Facile Route to the New Triazene Dyes Based on SubstituedPyrazolidin - 3, 5 dioneDerivatives

Dyes and pigments, Vol.92, n°3, pp.1212-1222, 2012, IF = 3.532

 

[ACL 159] T. HARIT, M. CHERFI, J. ISAAD, A. RIAHI, F. MALEK

New generation of functionalized bipyrazolic tripods: synthesis and study of their coordination properties towards metal cations

Tetrahedron, Vol.68, pp.4037-4041, 2012, IF = 3.025

 

[ACL 160] W. NAJJAR, X. LEGRAND, C. PUPIN, P. DALSANTO, S. BOUDE 

A simple discrete method for woven fabric reinforcements forming simulation, 

Key Engineering Materials, Vol.504-506, pp.213-218, 2012, IF = 0.224

 

[ACL 161] H. ALIBI, F. FAYALA, A. JEMNI, X. ZENG

A neural network system for prediction of thermal resistance of knit fabrics

Special Topics & Reviews in Porous Media, Vvol.3, n°1, 2012, IF = 1.2

 

[ACL 162] P. OUAGNE, D. SOULAT, C. TEPHANY, J. MOOTHOO, S. ALLAOUI, G. HIVET, D.DURIATTI 

Complex shape forming of flax based woven fabrics. Analysis of the yarn tensile strain during the process Key Engineering Materials, Vols.504-506, pp.231-236, 2012, IF = 0.224

 

[ACL 163] G. HIVET, S. ALLAOUI, B.T. CAM, P. OUAGNE, D. SOULAT 

Design and Potentiality of an Apparatus for Measuring Yarn/Yarn and Fabric/Fabric Friction

Experimental Mechanics, Vol.52, n°8, pp.1123-1136, 2012, IF=1.548

 

[ACL 164] S. ALLAOUI, G. HIVET, A. WENDLING, P. OUAGNE, D. SOULAT  

Influence Of The Dry Woven Fabrics Meso-Structure On Fabric/Fabric Contact Behaviour,

 Journal of Composite Materials, Vol.46, n°6, pp.627-639, March 2012, IF=1.068

 

[ACL 165] S. Allaoui, G. Hivet, D. Soulat, A. Wendling, P. Ouagne, S. Chatel

Experimental preforming of highly double curved shapes with a case corner using an interlock reinforcement

 International Journal of Material Forming. (accepted le 18/10/2012, under press). DOI: 10.1007/s12289-012-1116-5, IF= 0.509

 

[ACL 166] M. ASHRAF, N. DUMONT, C. CAMPAGNE, P. CHAMPAGNE, A. PERWUELZ, A. LERICHE, N.E. CHIHIB, 

Development of antibacterial polyester fabric by growth of ZnO nanorods, 

Journal of engineered fibers and fabrics, acceptée le 23 novembre 2012, IF = 0.8

 

[ACL 167] A. Kerkeni, N. Behary, P. DHULSTER, N.E. Chihib, A. Perwuelz

Study on the effect of plasma treatment of woven polyester fabrics with respect to nisin adsorption and antibacacterial activity,

 Journal of Applied Polymer Science, Vol.129, n°2, pp.890-903, 2012, IF = 1.395

 

 

 

YEAR 2011

 

[ACL 83] H. KANG, A. PINTI, A. TALEB-AHMED,  X. ZENG

An intelligent generalized system for tissue classification on MR images by integrating qualitative medical knowledge

Biomedical Signal Processing and Control, Vol.6, n°1, pp. 21-26, 2011, IF = 1.074

 

[ACL 84] J. LIU, B. ZUO, P. VROMAN, B. RABENASOLO, X. ZENG

Visual Quality Recognition of Nonwovens using Generalized Gaussian Density Model and Robust Bayesian Neural Network

Neurocomputing, Vol.74, pp.2813-2823, 2011, IF = 1.634

 

[ACL 85] J. LIU, B. ZUO, X. ZENG, P. VROMAN, B. RABENASOLO

Wavelet energy signatures and robust Bayesian neural network for visual quality recognition of nonwovens

Expert Systems with Applications, Vol.38,  pp. 8497-8508, 2011, IF = 2.203

 

[ACL 86] J. LIU, B. ZUO, X. ZENG, P. VROMAN, B. RABENASOLO, W.GAO

Visual conformity recognition of nonwovens with contourlet energy features and K-NN classifier

Fibers and Polymers, Vol.12, n°4,  pp. 541-545, 2011, IF = 0.531

 

[ACL 87] J. LIU, B. ZUO, X. ZENG, P. VROMAN, B. RABENASOLO, G. ZHANG

A comparison of robust Bayesian and LVQ Neural Network for visual recognition of nonwovens

Textile Research Journal, Vol.81, n°8,  pp.763-777, 2011, IF = 1.1

 

[ACL 88] P. LAPEYRONNNIE, P. LE GROGNEC, C. BINETRUY, F. BOUSSU

Homogenization of the elastic behaviour of a layer-to-layer angle-interlock composite

Composite Structures, Vol. 93, n°11, pp 2795-2807, 2011. IF 2010 = 2.028

 

[ACL 89] S. NAUMAN, P. LAPEYRONNIE, I. CRISTIAN, F. BOUSSU, V. KONCAR 

On line measurement of structural deformations in composites

IEEE Sensors Journal, Vol.11, n°6, pp.1329 ?1336, June 2011, IF = 1.61

 

[ACL 90] C. HA-MINH, F. BOUSSU, T. KANIT, D. CREPIN, A. IMAD 

Analysis on failure mechanisms of an interlock woven fabric under ballistic impact

Engineering Failure Analysis Journal, Vol.18, n°8, pp.2179-2187, December 2011, IF = 0.765

 

[ACL 91] C. HA-MINH, T. KANIT, F. BOUSSU, A. IMAD 

Numerical multi-scale modeling for textile woven fabric against ballistic impact

Computational Materials Science, Vol.50, pp.2172?2184, 2011, IF = 1.458

 

[ACL 92] F. BOUSSU

The use of warp interlock fabric inside textile composite protection against ballistic impact

Textile Research Journal, Vol.81, n°4, pp.344?354, March 2011, IF = 1.102

 

[ACL 93] S. PETRUSIC, M. LEWANDOWSKI, S. GIRAUD, P. JOVANCIC, B. BUGARSKI, S. OSTOJIC, V. KONCAR

Development and Characterization of Thermo-sensitive Hydrogels Based on Poly(N-isopropylacrylamide) and Calcium Alginate

Journal of Applied Polymer Science, Vol.124, n°2, pp.890-903, 2011, IF = 1.289

 

[ACL 94] C. COCHRANE, L. MEUNIER, F.M. KELLY, V. KONCAR 

Flexible displays for smart clothing: Part I  Overview

Indian Journal of Fibre & Textile Research, National Institute of Science Communication & Information Resources, Vol.36, pp.422-428, 2011,  IF=0.4

 

[ACL 95] L. MEUNIER, F.M. KELLY, C. COCHRANE, V. KONCAR 

Flexible displays for smart clothing: Part II ? Electrochromic displays, 

Indian Journal of Fibre & Textile Research, National Institute of Science Communication & Information Resources, Vol.36, pp.429-435, 2011, IF=0.4

 

[ACL 96] S. MORDON, C. COCHRANE, J.C. LESAGE, V. KONCAR

Innovative engineering design of a textile light diffuser for photodynamic therapy 

Photodiagnosis and Photodynamic Therapy, Vol.8, n°2, pp.142-143, June 2011, IF= 2.243.

 

[ACL 97] A. CAYLA, C. CAMPAGNE, M. ROCHERY, E. DEVAUX

Electrical, rheological properties and morphologies of biphasic systems filled with carbon nanotubes in one of the two phase

Synthetic Metals Journal, 2011, Vol.161, n°11-12), pp.1034-1042, IF = 1.829

 

[ACL 98] C. AUBRY, C. CAMPAGNE, M. ROCHERY, E. DEVAUX

PLA/Carbon nanotubes multifilament yarns for relative humidity textile sensor

Journal of Engineered Fibers and Fabrics, Vol.6, n°3, pp.13-24, 2011, IF = 0.807

 

[ACL 99] R. RENTENBERGER, A. CAYLA, T. VILLMOW, D. JEHNICHENA, C. CAMPAGNE, M. ROCHERY, E. DEVAUX, P. PÖTSCHKE

Multifilament fibres of poly(e-caprolactone)/poly(lactic acid) blends with multiwalled carbon nanotubes as sensor materials for ethyl acetate and acetone

Sensors and Actuators B:Chemical, Vol.160, n°1, pp.22-31, 2011, IF = 3.898

 

[ACL 100] F. SALAUN, M. LEWANDOWSKI, I. VROMAN, G. BEDEK, S. BOURBIGOT

Development and characterisation of flame-retardant fibres from isotactic polypropylene melt-compounded with melamine-formaldehyde microcapsules

Polymer Degradation and Stability, Vol.96, n°1, pp.131-143, 2011, IF = 2.769

 

[ACL 101] M. MURARIU, A. DOUMBIA, L. BONNAUD, A-L. DECHIEF, Y. PAINT, M. FERREIRA, C.CAMPAGNE, E. DEVAUX, P. DUBOIS 

High performance polylactide/ZnO nanocomposites designed for films and fibers with special end-use properties

Biomacromolecules, Vol.12, n°5 , pp.1762-1771, 2011, IF = 5.479

 

[ACL 102] F. SALAÜN, G. BÉDEK, É. DEVAUX, D. DUPONT

Influence of the washings on the thermal properties of polyurea-urethane microcapsules containing xylitol to provide a cooling effect

Materials Letters, Vol.65, n°2, pp.381-384, 2011, IF = 2.307

 

[ACL 103] F. SALAÜN, G. BÉDEK, É. DEVAUX, D. DUPONT, L. GENGEMBRE

Microencapsulation of a cooling agent by interfacial polymerization: influence of encapsulation parameters on poly (urea-urethane) microparticles characteristics 

Journal of Membrane Science, Vol.366-370, n°1-2, pp.23-33, 2011, IF = 3.85

 

[ACL 104] G. BÉDEK, F. SALAÜN, Z. MARTINKOWSKA, É. DEVAUX, D. DUPONT

Evaluation of thermal and moisture management properties on knitting fabrics and comparison with a physiological model in warm conditions

Applied Ergonomics, Vol.42, n°6, pp.792-800, 2011, IF = 1.428

 

[ACL 105] V. TAKKE, N. BEHARY, A. PERWUELZ, C. CAMPAGNE

Surface and adhesion properties of PEG-Poly(ethylene glycol) on polyester (PET-Polyethylene terephtalate) fabric surface : effect of air atmospheric plasma treatment

Journal of Applied Polymer Science, Vol.122, n°4, pp.2621-2629, 2011), IF = 1.289

 

[ACL 106] G. Agarwal, L. Koehl, A. Perwuelz 

Sensory study of Knitted Fabrics gone through washing cycles with domestic softener Part I : Establishment of a panel and assessment of the panel

Fibres and Textiles in Eastern Europe, Vol.3, n°19, pp.100-105, 2011, IF = 0.532 

 

 [ACL 107] G. AGARWAL, L. KOEHL, A. PERWUELZ

Simultaneous influence of ageing and softener on mechanical properties of knitted textiles during life cycle of garment

International Journal of Clothing Science and Technology Vol.23 , n° 2-3 , pp.152 ?169, 2011,  IF = 0.519

 

[ACL 108] G. AGARWAL, L. KOEHL, A. PERWUELZ

Interaction of Wash-Ageing and use of Fabric Softener for Drapeability of Knitted Fabrics

Textile Research Journal, Vol.81, n°1 , pp.1100 ?1112, 2011,  IF = 1.122

 

[ACL 109] G. AGARWAL, L. KOEHL, A. PERWUELZ, S.K. LEE

Interaction of textile parameters, wash-ageing and fabric softener with mechanical properties of knitted fabrics and correlation with textile-hand. I. Interaction of textile parameters with laundry process

Fibers and Polymers,  Vol.12, n°5, pp.670 ?678, 2011, IF = 0.836

 

[ACL 110] G. AGARWAL, L. KOEHL, A. PERWUELZ & K.S. LEE

Interaction of textile parameters, wash-ageing and fabric conditioner with mechanical properties and correlation with textile-hand. II. Relationship between mechanical properties and textile-hand

Fibers and Polymers, Vol 12, n°6, pp.795 ?800, 2011, IF = 0.836

 

[ACL 111] X. TAO, V. KONCAR, C. DUFOUR

Novel Geometry Pattern for the Wire Organic Electrochemical Textile Transistor

Journal of the Electrochemical Society, Vol.158, n°5, pp.H572-H577, 2011 IF = 2.483

 

[ACL 112] H. WANG, C. VASSEUR, Y. TIAN, V. KONCAR, N. CHRISTOV

Recursive Model Free Controller. Application to Friction Compensation and Trajectory Tracking

International Journal on Control, Automation and Systems, Vol. 9, n°6 ,  2011, IF = 0.953

 

[ACL 113] S. NAUMAN, I. CRISTIAN, V. KONCAR 

Simultaneous application of fibrous piezoresistive sensors for compression and traction detection in glass laminate composites

Sensors, Vol. 11, n. 10, pp. 9478-9498, 2011, IF = 1.821

 

[ACL 114] J. ISAAD, F. SALAUN 

Functionalized Poly (vinyl alcohol) polymers as Chemodosomiter material for the colorimetric sensing of cyanide in pure water 

Sensors & Actuators: B. Chemical, Vol.157, n°1 pp.26-33, 2011,  IF = 3.898

 

[ACL 115] J. ISAAD, A . EL ACHARI 

A novel glycoconjugated N-acetylamino aldehyde hydrazone azo dye as colorimetric chromogenic probe for cyanide detection in water

Analytica Chimica Acta, Vol.694, n°1-2,  pp.120-127, IF = 4.555

 

[ACL 116] J. ISAAD, A. EL ACHARI 

Colorimetric sensing of cyanide anions in aqueous media based on functional surface modification of natural cellulose materials

Tetrahedron, Vol.67, n°26, pp.4939-4947, 2011, IF = 3.025

 

[ACL 117] J. ISAAD, A. EL ACHARI 

A novel cyanide chemodosimeter based on trifluoroacetamide benzhydrol-2 as blinding motif : importance of substituent positioning on intra-molecular charge transfer

Tetrahedron, Vol.67, n°23, pp.4196-4201, 2011, IF = 3.219

 

[ACL 118] J. ISAAD, A. EL ACHARI

 Biosourced 3-Formyl Chromenyl -Azo Dye as Michael Acceptor Type of Chemodosimeterfor Cyanide in Aquous Environment

Tetrahedron, Vol.67, n°31, pp.5678-5685, 2011, IF=3.025

 

[ACL 119] A. KERKENI, D .GUPTA, A. PERWUELZ, N. BEHARY, 

Chemical grafting of curcumin at polyethylene terephthalate woven fabric surface using a prior surface activation with ultraviolet excimer lamp. 

 Journal of Applied Polymer Science, Vol. 120, n°3,  pp.1583-1590, 2011, IF = 1.289

 

[ACL 120] I. NEAGU, P. BRUNIAUX, D. AVRAM, V. AIRINEI

Simulation of longitudinal geometric yarn structure

International Journal of Advanced Intelligence Paradigms, Vol.3, n°2, pp.178-187, 2011, IF = 0.1

 

[ACL 121] S. KURSUN, F. KALAOGLU, S. THOMASSEY, I. CRISTIAN, V. KONCAR

A study on the beam pattern of ultrasonic sensor integrated to textile structure

International Journal of Clothing Science and Technology, Vol.23, n°4, pp.232-241, IF =  0.458

 

[ACL 122] N. BLANCHEMAIN, M.R. AGUILAR, F. CHAI, M. JIMENEZ, E. JEAN-BAPTISTE, A. EL ACHARI, B. MARTEL, H.F. HILDEBRAND, J. SAN ROMAN

Selective biological response of human pulmonary microvascular endothelial cells and human pulmonary artery smooth muscle cells on cold-plasma-modified polyester vascular prostheses

Biomedical Materials, Vol.6, pp.1-11, 2011,  IF = 2.158

 

 

 

- back to top -